FR SKATES FR1 80 Red (USED condition)
Photo 1 of 1
- Some scratches on a shell, used wheels. Returned from a customer in 1 time used condition cause size didn't fit.
Fit Guidelines: Some break-in required. Should feel very snug out of box, and then form fit after break-in. If having a wide foot or focused more on comfort than response, order 1/2 size larger. - Sizing Guidelines: FR SIZE CHART
- One of the best freeride skates in the World! Great comfrtable liners, special premium insoles, really strong extruded 6005ALU frames, special resistant bearings and wheels. These shells compatible with 3*110 and 3*125 FR frames.
FR SKATES - Sebastiens Laffargue brand where he put all his powerful and great innovations and quality control after his great experience with known SEBA brand. - Technical details:
- - Soft Heel Pads for Shock Absorption
- - Drylex Memory Foam Liner
- - FR Premium insoles
- 2x7 Holes Energy plates for power transfer and custom mounting
- FK Metal top Buckle
- Bearings FR MW9 Titalium Freeride
- Plastic Shell
- Plastic cuff 4 positions
- FR 4D Frame 243mm / Steel Race Axles 8mm
- SI Black Wheels 80mm/84A
-Use: Freeride, city skating, freestyle
Overview
-
Skating styleUrban / Freeride
-
GenderUnisex
-
ColorRed
Boots
-
Boot typeHardboot
-
Boot materialMolded Plastic
-
Cuff adjustment4 positions
-
LinersDrylex Memory Foam; removable
-
Heat moldableNo
-
LacingStandard laces
-
Upper buckleMetal Cuff Buckle
-
Instep closure45 Degree Metal Ratchet Buckle
-
Boot mount135 mm, 150 mm, 165 mm, 180 mm, 195 mm
Frames
-
FrameFR Skates 4D
-
Frame material4D Extruded Aluminium Frames
-
Frame mount165 mm, 180 mm, 195 mm
-
Frame length9.5” Axle to Axle (243 mm)
-
Size configurationWheel setup: 4x80 mm; frame length: 9.5” Axle to Axle (243 mm)
-
Removable frameYes
-
Frame rockerFlat
-
AxlesOne-Piece 8 mm
-
Maximum wheel diameter80 mm
Components
-
WheelsFR Skates Street Invader II
-
Wheel hardness84A
-
BearingsTwincam MW9 Titalium Freeride
-
BrakeNot included; Compatible with FR 4-wheel brake; sold separately
-
Skate tool includedYes
| Measured foot (cm) | EU | USM | Shell size (USM) | MP (cm) |
|---|---|---|---|---|
| 22 | 34 | 3 | 3–4 | 22 |
| 22.5 | 35 | 4 | 3–4 | 22.5 |
| 23 | 36 | 4.5 | 4.5–5 | 23 |
| 23.5 | 37 | 5 | 4.5–5 | 23.5 |
| 24.5 | 38 | 6 | 6–7 | 24.5 |
| 25 | 39 | 7 | 6–7 | 25.5 |
| 25.5 | 40 | 7.5 | 7.5 | 26 |
| 26 | 41 | 8 | 8–9 | 26.5 |
| 27 | 42 | 9 | 8–9 | 27 |
| 28 | 43 | 10 | 10–10.5 | 27.5 |
| 28.5 | 44 | 10.5 | 10–10.5 | 28 |
| 29 | 45 | 11 | 11–13 | 28.5 |
| 29.5 | 46 | 12 | 11–13 | 29.5 |
| 30 | 47 | 13 | 11–13 | 30 |
USM = US men’s size; USW = US women’s size. For example, USM 7 ≈ USW 8. Start with Measured foot (cm); MP is the size label and may differ from your foot measurement.
Shell size lists the skate sizes sharing one outer shell, not a foot-length range.
FR labels may show USM 11.5 instead of 11, or 13.5 instead of 13; the corresponding EU sizes are unchanged.
Compare the longer of your two foot measurements with the first column. This chart is a fit guide; available sizes are shown in the product’s size selector.
How to measure your feet
To find your correct size, first refer to your current shoe size. For a more accurate measurement, use this method:
Paper against the wall
Place a sheet of paper against a wall on a hard-surfaced floor.
Outline both feet
Place your heel against the wall and outline your feet one at a time.
Measure heel to toe
Measure the distance from heel to toe in centimeters. Use the longest measurement to match your best fit on the size chart above.
Check for proper fit
When trying on the skates the toes shouldn’t be pressed against the front of the skate and should lay flat. Toes can touch slightly the front of the skates, without pressure point.
