Jackson EVO W Hologram Pink
Photo 1 of 6
Colors
More than just good looks, the EVO delivers both style and performance. Built with Jackson’s signature quality and craftsmanship, the EVO boot is designed for durability, comfort, and support. Paired with the Pilot Viper 2.0 plate, crafted from lightweight yet strong Zytel Nylon, and featuring Atom’s signature 16-degree trucks, this setup offers excellent responsiveness and control. Whether you're gliding through the streets or dancing on the rink, the EVO is ready to roll. Wherever you want to go, EVO will take you there – Roll Your Way!
Jackson EVO Boot Features:
- Coated microfiber uppers for durability and style
- Solein board reinforcement for strength, comfort, and stability
- Memory foam ankle padding for a secure and cushioned fit
- Flex notch for enhanced ankle mobility
- Rolled collar to prevent Achilles tendon irritation
- Foam-backed vinyl and mesh tongue for added comfort
- Stylish traditional PVC soles
- 100% vegan-friendly
Overview
-
Skating styleOutdoor
-
GenderWomen
Boots
-
Boot typeQuad boot
-
Boot materialMicrofiber
-
LinersNylex Anti-Bacterial (Cloth); Memory foam ankle padding
-
Heat moldableNo
-
LacingLaces
Frames
-
FrameViper Zytel Nylon
-
Frame materialZytel nylon
-
Frame mountQuad plate mounting
-
Size configurationQuad setup: 4 wheels per skate; 62 mm
-
Frame rockerNot applicable (quad plate)
Components
-
WheelsAtom Pulse Lite (Pink)
-
Wheel diameter62 mm
-
Wheel hardness78A
-
BearingsBionic ABEC 7
-
BrakeIncluded; Compatible with Bionic XS Toe Stopper
| Measured (cm) | USW |
|---|---|
| 22 | 4 |
| 22.8 | 5 |
| 23.6 | 6 |
| 24.4 | 7 |
| 25.2 | 8 |
| 26 | 9 |
| 26.8 | 10 |
USW here means Jackson women’s skate sizes, not a conversion from everyday shoe sizes. Match your measured foot length to the chart. Measurements are the manufacturer’s published reference points; no extra allowance has been added.
Available sizes are shown in the product’s size selector.
How to measure your feet
Measure both feet and use the longer measurement as your reference.
Paper against the wall
Place a sheet of paper against a wall on a hard-surfaced floor.
Outline both feet
Place your heel against the wall and outline your feet one at a time.
Measure heel to toe
Measure the distance from heel to toe in centimeters. Use the longest measurement to match your best fit on the size chart above.
Check for proper fit
When trying on the skates the toes shouldn’t be pressed against the front of the skate and should lay flat. Toes can touch slightly the front of the skates, without pressure point.
Additional fit notes
Helpful sizing tips:
Remove the shoe from your right, (or longest), foot. Measure with sock if you want space, no sock for a tighter fit. Place a blank sheet of paper against the wall and stand on it with your heel against the wall. Mark straight down from your longest toe on the paper. Measure from the edge of the paper against the wall to the line marked on the paper, (use cm/mm/in.) Use the sizing chart at left to match your measurement with an accurate size.
Note: It is generally recommended that high-performance skaters go for a more snug (tighter) fit. Remember that leather boots will stretch and form to your foot over time, microfiber boots will hold true to size. For example, if your measurements are between a size 8 and 8.5, it would generally be recommended you go down to the size 8 in leather and give it some time to stretch for a better more secure fit in the long run. NOTE: Toes should never be curled.
