FR SKATES FR3 80 Black V2
Photo 1 of 6
Colors
Fit to Size
one size small
half size small
true to size
half size large
one size large
Customers found this skate fits half a size small, so best to buy half a size LARGER than your usual shoe size.
Updated for the year 2025-2026.
The new FR3 80 is the perfect skate for combining freeride and freestyle skating in one model. Thanks to the X3R rockerable frames, you can simply rotate the axles to get more maneuverability for freestyle skating or more stability for freeride skating.
The integrated plates provide better stability and precision, making the FR3 a great skate for improving your skills across different skating styles.
Compared to the previous version, this model is equipped with:
- X3R frames with new dimensions for a lower center of gravity and an updated design. Please note: these frames are not compatible with the old FR3 shell.
- FR logo ratchet buckle
- Downtown wheels
- Liner with black FR logo
- 4 mm mounting screws, compatible with a standard Allen key
Please note: The Standard FR BRAKE IS NOT COMPATIBLE with the X3R frame. Here is the compatible brake for X3R frames
Overview
-
Skating styleUrban
-
Recommended levelIntermediate and Better
-
GenderUnisex
-
ColorBlack
Boots
-
Boot typeHardboot
-
Boot materialMolded Plastic Shell
-
LinersDrylex memory foam; removable
-
FootbedStandard removable FR footbed
-
Heat moldableNo
-
LacingStandard Lacing
-
Upper bucklePlastic Cuff Buckles
-
Instep closure45° Plastic Ratchet Buckle
-
Boot mount7-hole energy plates
-
Sizing systemEU / US Men's (unisex)
Frames
-
FrameFR Skates X3R
-
Frame materialExtruded Aluminium
-
Frame mount165 mm
-
Frame length9.5" Axle to Axle (243 mm)
-
Size configurationWheel setup: 4x80 mm; frame length: 9.5" Axle to Axle (243 mm)
-
Removable frameYes
-
Frame rockerFlat / Rockerable front and rear axles; 2 mm at the front and rear lift
-
Axles(2) One-Piece 8 mm Aluminium ; (2) Two-Piece 8 mm Aluminium Rockerable
-
Maximum wheel diameter80 mm
Components
-
WheelsFR Skates Street Kings
-
Wheel diameter80 mm
-
Wheel hardness85A
-
BearingsTwinCam MW7 Freeride
-
BrakeNot included; Compatible with FR X3R brake (72–90 mm); sold separately
-
Skate tool includedYes
| Measured foot (cm) | EU | USM | Shell size (USM) | MP (cm) |
|---|---|---|---|---|
| 22 | 34 | 3 | 3–4 | 22 |
| 22.5 | 35 | 4 | 3–4 | 22.5 |
| 23 | 36 | 4.5 | 4.5–5 | 23 |
| 23.5 | 37 | 5 | 4.5–5 | 23.5 |
| 24.5 | 38 | 6 | 6–7 | 24.5 |
| 25 | 39 | 7 | 6–7 | 25.5 |
| 25.5 | 40 | 7.5 | 7.5 | 26 |
| 26 | 41 | 8 | 8–9 | 26.5 |
| 27 | 42 | 9 | 8–9 | 27 |
| 28 | 43 | 10 | 10–10.5 | 27.5 |
| 28.5 | 44 | 10.5 | 10–10.5 | 28 |
| 29 | 45 | 11 | 11–13 | 28.5 |
| 29.5 | 46 | 12 | 11–13 | 29.5 |
| 30 | 47 | 13 | 11–13 | 30 |
USM = US men’s size; USW = US women’s size. For example, USM 7 ≈ USW 8. Start with Measured foot (cm); MP is the size label and may differ from your foot measurement.
Shell size lists the skate sizes sharing one outer shell, not a foot-length range.
FR labels may show USM 11.5 instead of 11, or 13.5 instead of 13; the corresponding EU sizes are unchanged.
Compare the longer of your two foot measurements with the first column. This chart is a fit guide; available sizes are shown in the product’s size selector.
How to measure your feet
To find your correct size, first refer to your current shoe size. For a more accurate measurement, use this method:
Paper against the wall
Place a sheet of paper against a wall on a hard-surfaced floor.
Outline both feet
Place your heel against the wall and outline your feet one at a time.
Measure heel to toe
Measure the distance from heel to toe in centimeters. Use the longest measurement to match your best fit on the size chart above.
Check for proper fit
When trying on the skates the toes shouldn’t be pressed against the front of the skate and should lay flat. Toes can touch slightly the front of the skates, without pressure point.
