TNEC 58 V1.5 Black Aggressive Inline Skates
The TNEC 58 V1.5 is a complete aggressive inline skate for learning grinds, stalls and transitions at the skatepark or in the street. Each skate comes with four 58 mm / 88A wheels in a flat setup. The one-piece soul plate and frame use a dedicated non-UFS design. The V1.5 also features a replaceable buckle, reinforced cuff and soul rivets, and a liner with a neoprene toe.
Overview
-
Skating styleAggressive / Street; Park
Boots
-
Boot typeHardboot
-
LinersStock liner with neoprene toe; removable
-
Heat moldableNo
-
LacingStandard laces
-
Upper buckleReplaceable cuff buckle
-
Boot mountRiveted one-piece soul plate and frame; non-UFS
Frames
-
FrameTNEC 58 one-piece soul frame
-
Frame mountRiveted; non-UFS
-
Size configuration4 × 58 mm flat setup
-
Removable frameNo
-
Frame rockerFlat
-
AxlesTwo-piece axles
-
Maximum wheel diameter58 mm
Components
-
Wheel diameter58 mm
-
Wheel hardness88A
-
BearingsABEC 7
-
BrakeNot included
Approximate foot length with the stock liner
US 6–7 (Small) · 240–250 mm
US 8–9 (Medium) · 260–270 mm
US 10–11 (Large) · 280–290 mm
Measure both feet from heel to longest toe and use the longer measurement. Foot-length ranges are a fitting guide from Shop Task for the TNEC 58.
The V1.5 plastic shells measure approximately 265, 280 and 299 mm inside with the liner removed.